A complete range of DMX512 controlled dimmers for touring, portable and fixed installation. Various socket and output variations are available and the ability to control inductive and resistive loads make them a very flexible solution to your dimming needs. 2.5kw and 5kw variants are also available.

A single channel 13amp dimmer for followspots, location lighting, anywhere where a simple portable dimmer is required, plugs into a 13amp or 16amp hard power socket

Single channel dimmer.
For use in portable and installation applications.

Available in 6, 12 and 24 channel versions with a choice of output capacities, the slimline wall mount EKO dimmers incorporate a cleverly designed installation mounting frame.   This unique frame provides a lightweight bracket for the dimmer to be fixed in position without the dimmer being present.   Load and control screw terminals on the frame allow for building wiring to be terminated in a clear and unhindered manner.   When the installation is ready for commissioning, the dimmer can be hung on the installation frame and circuits then plugged into the special screw terminals – the 24 channel dimmer can easily be installed onto the frame and made fully operational in under 5 minutes!

6, 12 and 24 channel versions available.
Low profile Wall mount installation dimmer.

The i-Series dimmers consist of the iPAK and the iPRO.     The i-Series embody the same core design as the e-Series Dimmers, but are intended for permanent installation environments.   The list of installation options for the i-Series dimmers include floor mounting, wall mounting and truss hanging.

6 and 12 channel versions available.
Floor, Wall and Truss mount installation dimmer.
Available in hardwired, Shuko and 15amp connectors.

The e-Series family of dimmers includes the ePAK, ePRO and the new e1220.   All three dimmers have been designed for either 19" (3RU) rack installation or free standing operation.
6 and 12 channel versions available.
19" Rack mount or free standing, touring installation dimmers.
Output connector options include Shuko, Weiland, Socapex and hardwired.

The e24 dimmer has been designed as a total dimming package, providing a complete solution for pre-show set up, transportation and storage.   Built around LSC's long established philosophy of "no compromise on reliability, quality or features."   The e24 offers great value for money to any lighting operator in the professional touring, corporate or exhibition markets.
24 channel touring dimmer.
Enclosed in a rugged, compact flight case with removable front and rear covers.
Output connector options include Weiland and Socapex.

The TDS touring system is a modular touring rack that combines Four e-Series dimmers to provide 48 channels of dimming, Hotpatching of dimmer outputs and lighting outputs and Mains distribution with RCD and 3 pole MCB protection.     The TDS also incorporates a Powerguard digital monitor, measuring input voltage, current and frequency.

48 channel touring dimmer.
Enclosed in a rugged, compact flight case with removable front, rear and top covers.
Output connector options include Weiland and Socapex.

All prices are subject to change